+

QC4.0 QC3.0 USB Loại C Điện Thoại Di Động Adapter Sạc Nhanh 6 -35V Bước DC Tăng Cường Module dành Cho Huawei SCP/FCP Apple PD Qualcomm

USD 4.09USD 8.18

QC4.0 QC3.0 USB Loại C Điện Thoại Di Động Adapter Sạc Nhanh 6 -35V Bước DC Tăng Cường Module dành Cho Huawei SCP/FCP Apple PD Qualcomm

Description

This product has a small size (50*17*12mm), which is suitable for users to DIY. If it is combined with a 12-volt power adapter, it can be used for daily quick charging and storage at the same time Batteries, solar panels, dc generators and other power supply!Outdoor/car/power failure and other occasions under the good helper!This is the mobile phone charger and charger bao can not do!Have a home, more than a charge more assured!

 

1. Wide supply voltage :6V to 35V

2, high performance input anti-reverse connection: a special MOS tube to do anti-reverse connection, although the cost is high, but the effect is far beyond the diode, not hot!Novice DIY also need not worry about the back burn!

3.Quick charge status indicator: blue light is output indicator, red light is quick charge status indicator!

 

SW3516 Fast charge protocol compatibility:

 

USB PD30 (PS)                   support

Qualcomm QC4.0/QC3.0    support

Huawei SCP/FCP                support

Apple 2.4 A                         support

Samsung AFC                     support

VIVO9V2A twin engine     support

Mediatek PE20                   support

 

 

SW3518 Fast charge protocol compatibility:

 

USB PD30 (PS)                   support

Qualcomm QC4.0/QC3.0    support

Huawei SCP/FCP                support

Apple 2.4 A                         support

Samsung AFC                     support

VIVO9V2A twin engine     support

Mediatek PE20                   support

VOOC                                  support

 

Adopt external MOS tube, double wire and iron, silicon and aluminum magnetic ring, high efficiency, lower heating under the same charging power!!!

Double parallel low resistance electrolytic capacitor +6 1206 ceramic capacitors!Only for higher performance

 

Notes:

1. For quick charging with low voltage and large current, please use the original data cable. If you want to measure the charging voltage and current, please use the USB meter with low internal resistance!Otherwise affect charging current!2. TYPE O port is used for output charging;Use c-to-c /TYPE_C dual-head data cable TO charge mobile phone or laptop!3, QC4+/QC4.0/PD3.0 and other protocols use YPE O port!4. When the power supply voltage is higher than 21 volts, the maximum support of port C PD protocol is 20V3A output. The module volume is small.5. When USB port and TYPE_C port are plugged in at the same time, both ports are 5V output!

Specification

Package : SMD

Application : standard

Operating Temperature : -40°-+85°

Supply Voltage : 6 -35V

Model Number : Step Down Buck Boost Module

Dissipation Power : .

Condition : New

Brand Name : Si Tai&SH

Type : standard

is_customized : Yes

Origin : Mainland China

MMF60R580PS FET 60R580PS
USD 7.38USD 8.20
+